Custom Products from Masters Communications

Description:
The RA Case is a high-quality 3D plastic case, originally designed by Richard Bateman KD7BBC, that accommodates all of the RA Series radio adapters.

Currently, one lid option is available. It says "RA-40".

The box and lid fits any RA-Series radio adapter no matter which RA interface you have.

The holes in the RA-40 lid are aligned to match the LEDs on any Masters Communications RA Series radio adapter produced after June 1, 2020

The radio adapter is oriented so the connectors fit the clearances, then snapped down over the four stand-off "pins" inside the bottom of the box. The lid of the box snaps on and holds the circuit board in place. Yes - it's really that simple! Holes in the lid allows viewing the LEDs. Radio Adapters can be built with the LEDs seated against the printed circuit board, or, the leads left long and positioned so the lenses protrude (some) through the lid.

Secure PayPal Ordering - Use down arrow to make selection.
Quantity can be changed at PayPal after pressing the "Add to Cart" button.

RA Case with "RA-40" on the lid.

Shipping amount is calculated at checkout for shipping to most locations Worldwide.

RA Summary Features List.
RA Detailed Description.
A case can be 3D-printed from these free files - designed by Richard Bateman KD7BBC

Email Kevin Custer for ordering information, ordering by check, and/or support of this exciting product.

Product of Masters Communications, all rights reserved.
Specifications may change without notice.
Images are property of Kevin Custer - W3KKC
Board layout by Kevin Custer - W3KKC
HTML June 10, 2019, W3KKC All Rights Reserved!