CSM-32S Tone Frequency Selection Document

A logic "1" is created by placing the switch segment to the "ON" position. 

A logic "0" is created by placing the switch segment in the "OFF" position.

Do this, as required, at all six switch segment locations on SW1.  Look at
the photos of the board for additional reference.

1 = ON
0 = OFF

SW     1 2 3 4 5 6
067.0  0 0 0 0 0 0
069.3  0 1 1 0 0 0
071.9  0 0 0 0 0 1
074.4  1 0 0 0 0 0
077.0  0 0 0 0 1 1
079.7  0 1 0 0 0 0
082.5  1 0 0 0 0 1
085.4  1 1 0 0 0 0
088.5  1 0 0 0 1 1
091.5  0 0 1 0 0 0
094.8  0 1 0 0 0 1
097.4  1 0 1 0 0 0

SW     1 2 3 4 5 6
100.0  0 1 0 0 1 1
103.5  1 1 0 0 0 1
107.2  1 1 0 0 1 1
110.9  0 0 1 0 0 1
114.8  0 0 1 0 1 1
118.8  1 0 1 0 0 1
123.0  1 0 1 0 1 1
127.3  0 1 1 0 0 1
131.8  0 1 1 0 1 1
136.5  1 1 1 0 0 1
141.3  1 1 1 0 1 1
146.2  0 0 0 1 0 1

SW     1 2 3 4 5 6
151.4  0 0 0 1 1 1
156.7  1 0 0 1 0 1
159.8  0 1 1 1 0 0
162.2  1 0 0 1 1 1
167.9  0 1 0 1 0 1
173.8  0 1 0 1 1 1
179.9  1 1 0 1 0 1
183.5  1 0 1 1 0 0
186.2  1 1 0 1 1 1
189.9  0 0 1 1 0 0
192.8  0 0 1 1 0 1
196.6  1 1 0 1 0 0

SW     1 2 3 4 5 6
199.5  0 1 0 1 0 0
203.5  0 0 1 1 1 1
206.5  1 0 0 1 0 0
210.7  1 0 1 1 0 1
218.1  1 0 1 1 1 1
225.7  0 1 1 1 0 1
229.1  0 0 0 1 0 0
241.8  1 1 1 1 0 1
250.3  1 1 1 1 1 1
254.1  1 1 1 0 0 0
NOTONE 1 1 1 1 0 0